Why you should consider having a home safety check (EICR)

An Electrical Installation Condition Report or an EICR is a safety check conducted by an electrician to report on the state of the electrical installation in your home think of it like a MOT for a building.

For privately owned domestic properties, it’s not a statutory requirement to have an EICR, it’s just a good idea. It’s advisable that the electrical installation of your property is tested and inspected at regular intervals and no longer than once every ten years.

Prior to 2012 the EICR was known as a Periodic Inspection Report or a PIR.

So, why should you consider having an EICR Read on to find out…

  • To ensure there’s no damage to any electrical installations

As part of the EICR your electrician will conduct a visual inspection to look out for damaged or broken plug sockets, switches, light fittings and fuse boards and also signs of overheating and burning.

  • To determine if electrical devices are installed in the right locations

For example wall mounted light switches shouldn’t be installed inside bathrooms.

  • To check your earthing

As part of the EICR your electrician will check that your earthing system is suitable for your electrical installation. It is vital that you have adequate earthing for both the protection of you and others in your property and the property itself.

  • To check if RCDs are installed and to check their performance if they are

Your electrician will first of all check if Residual Current Devices (RCDs) are installed and if they are, they will check if that offer adequate protection from electric shock.

  • To determine just how much a risk any possible issues are

To determine just how much a risk any possible issues are, your electrician will number them from C1 to C3 on the EICR.

Understanding the codes

Code C1 – Danger present: With this issue there’s a risk of injury and immediate remedial action is required to remove the dangerous condition.

Code C2 – Potentially dangerous condition: Urgent remedial action required, this should declare the nature of the problem, not the remedial actions required.

Code C3 – Improvement recommended: This code more often than not implies that while the installation may not comply with current regulations, it complies with previous regulations and is deemed safe but its safety could be improved.


If you’re having any problems with your electrics, however minor you think they might be, or you have an old style fuse board and wiring. Then don’t leave it to chance. Get it checked out.

M & E Electrical can offer you:

  • A full EICR.
  • A full report
  • A free quote for any remedial work required.

Don’t delay, call today 0114 4000 099

Last updated by at .

Leave a Reply

Your email address will not be published.